• McMillan IRIDIUM Series Liquid Flow Control Systems

Iridium is a platform for configurable flow control.   It uses an integrated flow rate sensor and control valve to regulate flow rate regardless of inlet pressure fluctuation.  A flow control set point is provided by users via the touchscreen or remotely via electronic signal.  Then the controller adjusts the integrated valve as needed to maintain the desired flow rate.  This product features a PTFE micro turbine flow sensing module and a PTFE proportional diaphragm flow control module. This configuration can be set up to control liquid flow ranges as low as 7-50 mL/min and as high as 1.0-10.0  L/min. Other configurations can be customized as desired. 


Key Features

  • Liquid Flow Ranges: Flow ranges as low as 7-50 mL/minute and as high as 1.0-10.0 L/minute are available (1:10 turn-down ratio)
  • PTFE Flow Path:  Wetted materials of only PTFE, sapphire and Viton® (Kalrez® optional) ensure compatibility.
  • Integrated Touch Screen:  Using the integrated 3.2” color touchscreen, users can display flow rate, totalized flow, alarm states
  • Pelton Micro turbine:  Use a miniature PTFE microturbine wheel suspended on a sapphire shaft. An infrared beam detects the rotation speed.
  • Fast Control Logic:  By utilizing advanced microprocessors and specially designed software.
  • Expansion Slots: the Iridium platform has two open slots for expansion cards. Features include analog I/O, wireless communication, error outputs, and can also be customized as needed
  • Graphical Interface:  Through the integrated 3.2” touchscreen, the user can program set points, display current status, and adjust configuration while the unit continues to control flow rate and provide output.
  • Software Update:  The Iridium platform can easily be upgraded through downloadable firmware updates via the standard USB interface.
  • I/O Options:  RS-485 serial interface and Universal Serial Bus (USB) interfaces are standard. The Iridium also has two internal expandable card slots.
  • Modular Design:  The Iridium platform supports field-replacement of internal modules as needed, allowing the users to swap flow ranges, valve types, I/O modules, and more as application conditions change.
  • Fitting Choices:  The modular design of the Iridium also allows for inlet and outlet fitting sizes and types to be changed as needed. Female NPT, compression, flare, and other fitting types are available. 


Typical Applications

  • For analog control of multi-stage control or electrostatic coating control
  • Fluidics management system
  • Sample flow rate regulation
  • Analytical instrument
  • On-demand chemical dilution and blending 
  • Consumable usage monitoring  and regulation 


Iridium 6010-01-C1 Configuration


Flow Rate Range (mL/min of H2O)

2: 7-50 mL/min

3: 10-100 mL/min

4: 20-200 mL/min

5: 50-500 mL/min

6: 100-1,000 mL/min

7: 200-2,000 mL/min

8: 500- 5,000 mL/min

9: 1,000 -10,000 mL/min

Fitting Options (Inlet/Outlet)

F4: ¼” Male Flaretek®

F6: 3/8” Male Flaretek®

F7: 1/2” Male Flaretek®

N2: 1/8” FNPT

N4: ¼” FNPT

N6: 3/8” FNPT

Analog I/O Expansion CardEAA
Relay Option Card (Optional)EBA
Kalrez® Seals (instead of standard Viton®)EKZ
Custom ConfigurationZxxxx (assigned by factory)


Compatible Range/Fitting Chart


Flow RangeF4F6F7N2N4N6
2Yes

Yes

3Yes

Yes

4Yes
Yes

Yes


5Yes
Yes

Yes
Yes

6Yes
Yes

Yes
Yes

7
Yes

Yes
Yes

8
Yes
Yes
Yes
Yes
Yes
9
Yes
Yes

Yes
Yes




Thumb File information
McMillan-Flow-Iridium-Flow-Control-Brochure.pdf 2.15MB
IRIDIUM SERIES
Accuracy ±1.0% typical from factory, full scale; ±0.5% typical with user calibration, full scale
Precision ±0.5% or better typical
Pressure Rating 80 psig (5.4 bar) maximum working 100 psig (6.8 bar) over-pressure
Temperature Rating (Fluid) 5 to 40 °C
Temperature Rating (Environment) Operating Temperature : 5 to 50 °C Storage Temperature: 0 to 70 °C Relative Humidity: 20 to 85%
Valve Type PTFE diaphragm, cam-driven
Wetted Materials PTFE Sapphire
Compatible Liquids Most low viscosity fluids
Warm-up Time <10 seconds typical
Zero Drift None
Integrated Display 3.2” (86 mm) TFT LCD color display
Power Requirement Recommended Voltage: 24 VDC
Electrical Connections 15-pin Male D-Sub Micro-USB
Typical Response Time Adjustable, typically <2 seconds
Seal Material Viton® standard ; Kalrez® option available
Standard I/O Interface USB 2.0 RS485
Optional I/O Interfaces Analog I/O Card [EAA] VDC Input (0-10 VDC or 0-5VDC Other options available
Differential Pressure 20 psid (1.36 bar) to reach 100% rated flow

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

McMillan IRIDIUM Series Liquid Flow Control Systems

  • Brand: MCM Flow
  • Product Code: FC601001C1
  • Availability: In Stock
  • $4,199.00


Available Options


Related Products

SMC IRV10-N07BG vacuum regulator, 1/4'' Push to Connect Port

SMC IRV10-N07BG vacuum regulator, 1/4'' Push to Connect Port

The IRV series vacuum regulator is offered in three compact, lightweight sizes. Adjustment resolutio..

$96.90

McMillan S-111 LIQUID FLOW METERS

McMillan S-111 LIQUID FLOW METERS

This product is suitable for flow measurement for a wide variety of fluids by relying on a Pelton-ty..

$430.00

Tags: Flow Control, Automation, Valve, Fluid Handling