Peristaltic Pump, Dispensing & Filling System FK1-100Z

This product (FK1-100Z) is mainly designed for automatic filling and dispensing machine configured with peristaltic pumps. The system could work alone to dispense and fill the fluid into containers. The product has 304SS housing with good corrosion resistance and is controlled by FC32S-1 which is separated to allow flexible mounting. FU5B-1 has 4 channels and can be expanded due to modular design. The controller can control up to 32 channels. The graphic LCD displays running parameters including the status and flow rates. Each channel has independent membrane key and LED display, which users can set the channel address and calibrate the dispensing volume when system is running or stop.

Key Features

Control mode: off-line (Controller FC32S-1 control), on-line (external signal control or communication control)
Start/stop control signal input: 1 switch signal for each dispensing unit
No bottle signal input: 4 switch signals corresponding to 4 channels for each dispensing unit.
Communication function: RS485 communication interface, Modbus protocol, communication parameters
Dispensing calibration: dispensing volume of every channel can be calibrated through percentage, volume, weight or average weight method.
Channel enable: every channel can be set as enable or disable
Fill/Backflow: all the channels can be set as enable or disable
Channel address: communication address of each channel can be set through independent membrane key and displayed on independent LED
Password function: protect the system parameters and prevent mis-operation through the password function
Dispensing parameter set: dispensing parameters can be saved as a parameter set which can be invoked easily without reset it.

Typical Applications

Precision liquid handling or delivery
Mainly designed for Laboratory and light industry applications
Food and beverage industry (milk, juice or water)
Pharmaceutical industry (sterile medical packages)
Cosmetic industry (skin care liquid or detergents)

Model number	FK1-100Z
Dispensing volume	0.5-100 ml
Dispensing time	0.5 to 30 sec
Speed	1-600 rpm
Back suction time	0 to 1 sec
Dispense volume calibration	Calibrate dispensing volume to improve accuracy
Online dispensing volume adjustment	The dispensing volume can be adjusted in mid-process according to demand
Copy number	1-60000, "0" means unlimited cycle
Start control signal input	1 switch signal
No bottle signal input	4 switch signals corresponding to 4 channels
Communication	RS485 interface, Modbus protocol
Power-off memory	Storing the running parameter automatically
Dispense parameter setting	Can be saved as parameter setting and invoked easily
Dispensing unit dim. (L x W x H)	800 mm x 200 mm x 174 mm
Power supply	AC220V±10% /300W
Operating temperature	Temperature 0 - 40 °C
Relative humidity	<80%
IP rating	IP31
Weight	18.7 kg

Other Technical Parameters

Dispensing Volume (mL)	Tubing	Dispensing Time (s)	Accuracy	Dispensing ID (mm)	Productivity (pcs/min)
0.1-0.3	2 x 13#	0.5-0.7	±6uL	≤0.5	40-35
0.3-0.6	2 x 13#	0.7-1.1	±2%	≤0.5	35-28
0.6-1.0	2 x 13#	1.1-1.7	±1%	≤0.5	28-22
1.0-2.0	2 x 14#	0.6-0.9	±2%	≤1.0	37-31
2.0-4.0	2 x 14#	0.9-1.6	±1%	≤1.0	31-23
2.0-3.0	2 x 19#	0.7-0.9	±2%	≤1.5	35-31
3.0-5.0	2 x 19#	0.8-1.3	±1%	≤1.5	33-26
4.0-6.0	2 x 16#	0.8-1.0	±2%	≤2.0	33-30
6.0-10.0	2 x 16#	1.0-1.6	±1%	≤2.0	33-23
6.0-10.0	2 x 25#	0.6-0.8	±2%	≤3.0	37-33
10.0-30.0	2 x 25#	0.8-2.0	±1%	≤3.0	33-20