Gear pump WT3000-1JA is specially designed for batch dispensing and filling applications. The pump has LCD, which could display the parameters and running states. The flow rate control mode is for continuous fluid transferring ranging from 85.7 mL/min to 2571.4 mL/min, while the dispensing control mode is for dispensing the fluid at desired dispensing volume (0.1mL to 999 L.  The pump speed can be adjusted manually through the control panel or automatically through external control signal. Different wet materials are available to ensure pump chemical compatibility. The outlet pressure changes along with the change of setting flow rate. The maximum pressure can be reached about 0.8MPa.  The compact and precise gear pump heads are noiseless, pulsation-free and are preferred any applications when accurate dosing or high pressure output is required.

Key Features

• Acceptable pump heads: MG204, MG209, MG213
• Flow rate function: Deliver the liquid according to the set flow rates
• Dispensing function: Dispensing volume, copy number and pause time can be set.
• Calibration function: The flow rates and the dispensing volume can be calibrated to increase the accuracy.
• Operating mode: Membrane keypad
• Prime function for fast filling and emptying
• External control input: Control the flow rates and start/stop of the pump
• External control output: Output start/stop and speed signal.
• Foot switch:  Control the start/stop of the pump
• Communication function: Realize computer control through RS485 communication interface
• Memory function: Store the running parameters automatically.
• Cooling mode: Heat-emitting fan
• Running directions: Clockwise
  

Typical Applications

• Precision liquid handling or delivery
• Liquid handling with high accuracy at a small flow rate
• For viscous, high pressure, high precision fluid dosing