Maximum engraving area: 24" x 18". The Epilog Legend Series of Laser Engravers features Epilog's top-of-the-line CO₂ laser systems that are utilized by customers to perform the highest-quality engraving and cutting of wood, acrylics, plastics, glass, stone, and much more.

Key Features:

Maximum engraving area: 24" x 18"
Integrated cutting table: Providing excellent cutting quality with the vector cutting table
Accupoint^TM motion control system: Enabling high-detail engraving, even at the highest speeds
Integrated vacuum table: Holding down thin, warped materials at positions
Robust level engraving table: Ensuring flat, even engraving across the work surface with the 1'' (25.4 mm) thick engraving table
Radiance high resolution optics: No additional, expensive lens packages are needed for the high-resolution engraving
CO2 waveguide laser tubes from Epilog
Memory in the machine: Improving job management and data integrity with the 64-MB RAM in every system
Auto focusing: Automatically setting up the correct table height for focusing the lens to achieve the optimal-detail engraving

Epilog Mini 18

Epilog Mini 24

Epilog Helix 24

Engraving Area

18" x 12"

(457 x 305 mm)

24" x 12"

(610 x 305 mm)

24" x 18"

(610 x 457 mm)

Maximum Material Thickness

4" (102 mm)

5.5" (140 mm)

8.5" (216 mm)

Maximum Material Thickness with Table Removed

6" (152 mm) with 17.5" x 10"

(445 x 254 mm) engraving area

8" (203 mm) with 23.5" x 11.75"

(597 x 298 mm) engraving area

11" (279 mm) with 23.5" x 17"

(597 x 432 mm) engraving area

Laser Wattage

30 or 40 watts

30, 40, 50 or 60 watts

30, 40, 50, 60 or 75 watts

Laser Source

State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable.

Intelligent Memory Capacity

Multiple file storage up to 64 MB. Rolling buffer allows files of any size to be engraved.

Air Assist

Attach an air compressor to our included Air Assist to remove heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the cutting surface.

Laser Dashboard

The Laser Dashboard™ controls your Epilog Laser's settings from a wide range of software packages - from design programs to spreadsheet applications to CAD drawing packages.

Red Dot Pointer

Since the laser beam is invisible, the Red Dot Pointer on Epilog's Mini and Helix Lasers allows you to have a visual reference for locating where the laser will fire.

Relocatable Home

When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand with the convenient Movable Home Position feature on the Legend Series Lasers.

Operating Modes

Optimized raster, vector or combined modes.

Motion Control System

High-speed, continuous-loop, DC servo motors using linear and rotary encoder technology for precise positioning.

X-Axis Bearings

Ground and polished stainless steel NeverWear Bearing System.

Belts

Advanced B-style Kevlar Belts.

Resolution

User controlled from 75 to 1200 dpi.

Speed and Power Control

Computer or manually control speed and power in 1% increments to 100%. Vector color mapping links speed, power and focus to any RGB color.

Print Interface

10 Base-T Ethernet or USB Connection. Compatible with Windows® XP/Vista/7/8/10.

Dimensions

(W x D x H)

27.8" x 26" x 13.5"

(706 x 660 x 343 mm)

34.5" x 26" x 16"

(876 x 660 x 406 mm)

36.5" x 32" x 39.8"

(927 x 813 x 1011 mm)

Weight

70 lbs (32 kg)

100 lbs (45.5 kg) w/stand

90 lbs (41 kg)

120 lbs (55 kg) w/stand

180 lbs (82 kg)

Electrical Requirements

Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase.

Maximum Table Weight

The Mini has a static table weight of 50 lbs (22.7 kg) and a lifting table weight of 25 lbs (11.5 kg).

The Helix 24 has a static table weight of 70 lbs (32 kg) and a lifting table weight of 30 lbs (14 kg).

Normal Sound Level

59 db

62 db

Ventilation System

350 - 400 CFM (595-680 m3/hr) external exhaust to the outside or internal filtration system is required. There is one output port, 4" in diameter.

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating Bad Good

Captcha

Please complete the captcha validation below

Epilog Legend Laser Engraver-Helix 24

Product Code: Helix 24
Reward Points: 100
Availability: In Stock

Available Options

Power

Qty

0 reviews / Write a review

Epilog Mini 18

Epilog Mini 24

Epilog Helix 24

Engraving Area

18" x 12"

(457 x 305 mm)

24" x 12"

(610 x 305 mm)

24" x 18"

(610 x 457 mm)

Maximum Material Thickness

4" (102 mm)

5.5" (140 mm)

8.5" (216 mm)

Maximum Material Thickness with Table Removed

6" (152 mm) with 17.5" x 10"

(445 x 254 mm) engraving area

8" (203 mm) with 23.5" x 11.75"

(597 x 298 mm) engraving area

11" (279 mm) with 23.5" x 17"

(597 x 432 mm) engraving area

Laser Wattage

30 or 40 watts

30, 40, 50 or 60 watts

30, 40, 50, 60 or 75 watts

Laser Source

State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable.

Intelligent Memory Capacity

Multiple file storage up to 64 MB. Rolling buffer allows files of any size to be engraved.

Air Assist

Attach an air compressor to our included Air Assist to remove heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the cutting surface.

Laser Dashboard

The Laser Dashboard™ controls your Epilog Laser's settings from a wide range of software packages - from design programs to spreadsheet applications to CAD drawing packages.

Red Dot Pointer

Since the laser beam is invisible, the Red Dot Pointer on Epilog's Mini and Helix Lasers allows you to have a visual reference for locating where the laser will fire.

Relocatable Home

When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand with the convenient Movable Home Position feature on the Legend Series Lasers.

Operating Modes

Optimized raster, vector or combined modes.

Motion Control System

High-speed, continuous-loop, DC servo motors using linear and rotary encoder technology for precise positioning.

X-Axis Bearings

Ground and polished stainless steel NeverWear Bearing System.

Belts

Advanced B-style Kevlar Belts.

Resolution

User controlled from 75 to 1200 dpi.

Speed and Power Control

Computer or manually control speed and power in 1% increments to 100%. Vector color mapping links speed, power and focus to any RGB color.

Print Interface

10 Base-T Ethernet or USB Connection. Compatible with Windows® XP/Vista/7/8/10.

Dimensions

(W x D x H)

27.8" x 26" x 13.5"

(706 x 660 x 343 mm)

34.5" x 26" x 16"

(876 x 660 x 406 mm)

36.5" x 32" x 39.8"

(927 x 813 x 1011 mm)

Weight

70 lbs (32 kg)

100 lbs (45.5 kg) w/stand

90 lbs (41 kg)

120 lbs (55 kg) w/stand

180 lbs (82 kg)

Electrical Requirements

Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase.

Maximum Table Weight

The Mini has a static table weight of 50 lbs (22.7 kg) and a lifting table weight of 25 lbs (11.5 kg).

The Helix 24 has a static table weight of 70 lbs (32 kg) and a lifting table weight of 30 lbs (14 kg).

Normal Sound Level

59 db

59 db

62 db

Ventilation System

350 - 400 CFM (595-680 m3/hr) external exhaust to the outside or internal filtration system is required. There is one output port, 4" in diameter.

Write a review

Epilog Legend Laser Engraver-Helix 24

Available Options

Related Products