This product (HMD04-1) is mainly designed for automatic filling and dispensing machine configured with syringe pumps. The system could work alone to dispense and fill the fluid into containers. The product has 304SS housing with good corrosion resistance. HMD04-1 has 4 channels and can be expanded due to modular design. The controller can control up to 16 channels. The graphic LCD displays running parameters including the status and flow rates. Each channel has independent membrane key and LED display, which users can set the channel address and calibrate the dispensing volume when system is running or stop. This product is suitable for applications of small volume dispensing and high accuracy requirements.

Key Features

Control mode: off-line (controller), on-line (external signal control or communication control)
Start/stop control signal input: 1 switch signal for each dispensing unit
No bottle signal input: 4 switch signals corresponding to 4 channels for each dispensing unit.
Communication function: RS485 communication interface, Modbus protocol, communication parameters
Dispensing calibration: dispensing volume of every channel can be calibrated through percentage, volume, weight or average weight method.
Channel enable: every channel can be set as enable or disable
Fill/Backflow: all the channels can be set as enable or disable
Channel address: communication address of each channel can be set through independent membrane key and displayed on independent LED
Password function: protect the system parameters and prevent mis-operation through the password function
Dispensing parameter set: dispensing parameters can be saved as a parameter set which can be invoked easily

Typical Applications

Precision liquid handling or delivery
Mainly designed for Laboratory and light industry applications
Food and beverage industry (milk, juice or water)
Pharmaceutical industry (sterile medical packages)
Cosmetic industry (skin care liquid or detergents)

System Model	HMD04-1
Accuracy	≤1% (dispensing volume is the 100% of syringe capacity)
Precision	Repeatability <0.5% (dispensing volume is the 100% of syringe capacity) Repeatability <2% (dispensing volume is more than 20% of syringe capacity)
Dispensing Volume	100 μL - 5 mL (dispensing volume is the 20% - 100% of syringe capacity)
Speed	8.3 μL/s to 2.5 mL/s
Dispensing & Filling Time	Automatically calculate the time based on volume and speed
Pause Time of Dispensing	1 to 3600 sec
Copy Number	1 to 30,000, "0" means unlimited cycle
Calibration	Each channel dispensing volume is calibrated separately
Syringe	500 μL, 1 mL, 2.5 mL, 5 mL, full stroke is 30 mm
Wetted Material	Borosilicate Glass, PTFE, PCTFE
Maximum Pressure	0.68 MPa
Tubing Fitting	1/4''-28 thread
Syringe Fitting	1/4''-28 thread
Control Mode	Control panel or external control
Dispensing Start Signal Input	TTL signal, high level to trigger (all channels are controlled synchronously)
Rinse Signal Input	TTL signal, high level to trigger (all channels are controlled synchronously)
No Bottle Signal Input	TTL signal, low level to trigger (each channel is controlled separately)
Dimensions (L x W x H)	600 mm x 256 mm x 170 mm ( controller and one driver unit)
Power Supply	AC 90-260V/60W
Operating Temperature	15 to 40 °C
Relative Humidity	< 80%
IP Rating	IP 31, stainless steel housing
Weight	10 kg (controller + one unit)

Write a review

Your Name

Your Review

Note: HTML is not translated!

Rating Bad Good

Captcha

Please complete the captcha validation below

Syringe Pump Dispensing & Filling System HMD04-1

Brand: Longer
Product Code: HMD04-1
Availability: In Stock

$3,820.90

Available Options

Discount Option

Qty

0 reviews / Write a review