The Acrylic Glovebox design is based on a modular platform that allows users to expand their existing industrial and lab gloveboxes to meet increasing workspace requirements. The Glovebox expansion may include additional antechambers for thru-flow work processes, cold storage freezers, process vacuum ovens and furnaces, and a full line of accessories. The Acrylic models include a series of glovebox chambers with lengths of 650 mm and 1500 mm. We also take custom-built orders according to your needs. More details can be found in the downloadable brochure.

Key Features

All glovebox chambers made of Acrylic
All pipework made of stainless steel
Purifier regeneration frequency one per year
Automatic antechamber control
NVD-4 vacuum pump
Oxygen Analyzer and Moisture Analyzer
Auto purge function
User friendly and simple operation: Color LCD touch panel and PLC controller
Energy-Save mode, automatically reducing power consumption by up to 90% during idle periods
Automatic regenerable H2O/O2 purifier
Attainable purity O2<1 ppm , H2O<1 ppm (dew point also available for moisture reading)
Industry leading low leak rate of <0.05% Vol/hour at -10 mbar condition
Stainless steel encapsulated blower with frequency converter
Circulation capacity more than 84 m3/h (50 cfm) at ΔP = 60 mbar (60 Hz)
Compatible with world-wide voltage standards
Integrated high vacuum feedthrough
Conform to CE
One year limited warranty, and lifetime technical support

Typical Applications

Create oxygen-free and moisture-free environment for organometallic chemistry, organic synthesis, hydrophilic chemical handling, medical devices, electronic component handling, lithium battery handling, solar cell assembly, hemoglobin and metabolic research, catalyst handling, medicine synthesis, nuclear industry, membrane of organic EL preparation, etc.

Chamber Capacity	Approximately 8.8 cu. F.t or 0.25 m³
Overall Dimensions	35.4.9" L x 25.6" W x 32.7" H, 900 mm L x 650 mm W x 830 mm H
Interior Chamber Dimensions	25.6” L x 23.6” W x 25.6” L, 650 mm L x 600 mm W x 650 mm H
Glove Port Takform Dimensions	8.6” or 220 mm in diameter, O-ring sealed
Butyl Rubber Gloves	Standard 0.4 mm in thickness, and 0.8 mm upon request
HEPA Filters	Inlet and outlet filters eliminate particles with the size >0.3 μm
Leakage Rate	Typically <0.05% vol/hr at -10 mbar
Gas Purification System	Automated removal of H₂O and O₂ down to <1 ppm
Main Antechamber	9.8” (Φ) x 9.8” (L), or 250 mm (Φ) x 250 mm (L), with pressure down to 1 x 10^-2 mbar
O₂-Analyzer Measurement Range	0 to 1000 ppm (V)
H₂O-Analyzer Measurement Range	0 to 1000 ppm (V)
Compliance	UL, ISO9001, and CE
Warranty	One year limited warranty, and lifetime technical support