• Bluewhite CHEM-PRO Diaphragm Metering Pump C2F, Max. Pressure 175 PSI, Manual Control
    Bluewhite CHEM-PRO Diaphragm Metering Pump C2F, Max. Pressure 175 PSI, Manual Control Bluewhite CHEM-PRO Diaphragm Metering Pump C2F, Max. Pressure 175 PSI, Manual Control Bluewhite CHEM-PRO Diaphragm Metering Pump C2F, Max. Pressure 175 PSI, Manual Control Bluewhite CHEM-PRO Diaphragm Metering Pump C2F, Max. Pressure 175 PSI, Manual Control
Chem-Pro C2F diaphragm metering pump with chemical compatible wetted parts is capable of pumping clean, or aggressive chemicals into high-pressure systems and require very little maintenance. These metering pumps are more energy efficient using more motor torque on he forward stroke.  The maximum flow rate can reach to 1.3 L/min and maximum pressure is about 175 PSI (166 strokes per min).  The feed rate resolution is about 0.1%. 


Key Features

  • Operator friendly digital controls with backlit LCD display and DFD alarm display.
  • Signal inputs include: 4-20mA, pulse inputs, and Remote start/stop
  • Signal outputs include: Relay (3 amp), open collector, 4-20mA (optional)
  • Large PVDF, Ceramic, double ball check valves without metal springs.
  • Backlit LCD displays motor speed, input signal values, service and alarm status.
  • Includes Diaphragm Failure Detection (DFD) system.
  • Compatible with Blue-White’s Flow Verification Sensor (FVS) system.
  • Alarm relay monitors the DFD system and the FVS system.
  • SCADA ready 5-30V DC open collector output loop closes while motor is energized.
  • NEMA 4X (IP66) wash-down, chemically resistant powder coated enclosure
  • Dia-Flex™ PVDF single-layer Diaphragm
  • Increased feed rate resolution, from 1% to 0.1%
  • Protective LCD snap-on cover
  • 2 year limited warranty 

Typical Applications

  • Chemical metering
  • Waste water treatment
  • Municipal water treatment
  • Boiler treatment
  • Cooling tower treatment
  • Acid injection
  • Plating chemical injection 
  • Fluoridation
  • Paper/pulp chemical feeding
  • Fertilizer injection 
Thumb File information
85000-096CHEM-PRO C2_C3 Datasheet.pdf 723.5KB
80000-514 C2F_C3F Instrution Manual.pdf 3.43MB
Bluewhite Chem-Pro
Max. working pressure 175 psig (12 bar)
Max. fluid temperature 130° F (54° C)
Max. ambient temperature 14 to 110° F (-10 to 46° C )
Maximum viscosity 1,000 Centipoise
Maximum suction lift 15 ft. Water, 0 psig
Operating Voltage 115VAC/60Hz; 230VAC/60Hz; 220VAC/50Hz; 240VAC/50Hz
Power Cord Options 115V60Hz = NEMA 5/15 (USA); 230V60Hz = NEMA 6/15 (USA)
Duty cycle Continuous
Motor speed adjustment resolution 0.1% increments
Display Backlit LCD, UV resistant
Enclosure NEMA 4X (IP66)
Product weight 24lb. (10.9 Kg)

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Bluewhite CHEM-PRO Diaphragm Metering Pump C2F, Max. Pressure 175 PSI, Manual Control

  • Brand: Blue-White
  • Product Code: BW-C2F
  • Availability: In Stock
  • $1,504.24


Available Options


Related Products

KNF FP 400 - Low Pulsation Diaphragm Pump

KNF FP 400 - Low Pulsation Diaphragm Pump

The FP 400 is a new generation of diaphragm pump from KNF combining the traditional advantages of ..

Bluewhite Flex-Pro Peristaltic Metering Pump A2F Basic Controls

Bluewhite Flex-Pro Peristaltic Metering Pump A2F Basic Controls

Flex-Pro A3 Series Peristaltic Pump for high pressure and high accuracy applications.  It does ..

$2,074.38

Bluewhite Micro-Flo Paddlewheel Flowmeter, 115V Models with 1/4'' F/NPT and Clear PVC Lens

Bluewhite Micro-Flo Paddlewheel Flowmeter, 115V Models with 1/4'' F/NPT and Clear PVC Lens

This product is consists of infra-red light sensor, PVDF chemical resistant lens and NEMA 4X weather..

$335.24

Bluewhite C-1700N CHEM-FEED Diaphragm Metering Pump, Max. Pressure 125 PSIG, Flow Rate of 48 LPH

Bluewhite C-1700N CHEM-FEED Diaphragm Metering Pump, Max. Pressure 125 PSIG, Flow Rate of 48 LPH

Chem-FEED C-1700N diaphragm metering pump features a quick adjusting, high accuracy mechanical strok..

$665.56

Tags: Diaphragm Pump, Metering Pump, Water Treatment