• Art Photonics, FlexiSpec® Standard ATR-Fiber Probes with 12.0 mm OD Shaft
    Art Photonics, FlexiSpec® Standard ATR-Fiber Probes with 12.0 mm OD Shaft Art Photonics, FlexiSpec® Standard ATR-Fiber Probes with 12.0 mm OD Shaft Art Photonics, FlexiSpec® Standard ATR-Fiber Probes with 12.0 mm OD Shaft

FlexiSpec® product line is the latest generation of Attenuated Total Reflection. Near & Mid IR-fiber ATR-Probes produced for any type of FT-NIR, FT-IR and other IR-spectrometers, photometers and IR-LED or QCL spectral sensors. ATR immersion fiber optic probes with patented design are suitable for reaction monitoring in lab, pilot plant and for full automated process control.

Key Features

  • High throughput in any part of Near & Mid InfraRed-spectrum
  • ATR-tip shaped for immersion in liquid flow without dead zone
  • Flexible and robust for industrial applications in harsh environment
  • Compatible with all spectrometers and automated process-interfaces

Typical Applications

  • Reaction Monitoring in real time
  • Process Analytical Technologies (PAT)
  • Remote Polymerization Control
  • Crystallization Process Screening In-situ IR-Spectroscopy for PAT in Chemical, Petrochemical, Atomic, Bio-pharmaceutical & Food Industry





Probe TypeADi-ATRZnSe-ATRSi-ATRZrO2-ATR
Transmission Range

5.2-16.7μm

600-1900 cm-1

3.2-16.7μm

600-3100 cm-1

3.2-16.7μm

600-3100 cm-1

1.1-6.7μm

1550-9000 cm-1

Fiber TypePIR-900/1000 Silver HalideIR-900/1000 Silver Halide
IR-900/1000 Silver Halide
CIR 500/550 Chalcogenide
Temperature Range-100°C / + 140°C
-100°C / + 140°C
-100°C / + 140°C
-100°C / + 90°C
Max Pressure200-300 Bar10 Bar100 Bar100 Bar


Other Parameters

Total Length1.5 m (1 to 5 m optional)
Shaft Length300 mm (100-700 mm optional)
Shaft Diameter12 mm, 6.3 mm (3 mm optional) 
Shaft MaterialHastelloy C22
Length of Legs500 mm (opt. 200 – 500 mm)
Protective Tube MaterialLiquid Tight SS-Conduit, KOPEX-Tube
Minimal Bending Radius130 mm
Input/Output ConnectorsLong SMA (opt.: any other type)
Compatible Process-InterfacesCeramat-FOS or SensoGate-FOS



Thumb File information
ATR-Probe.pdf 1.13MB
Overview-ATR-Probes.pdf 308.53KB

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Art Photonics, FlexiSpec® Standard ATR-Fiber Probes with 12.0 mm OD Shaft

  • Brand: Art Photonics
  • Product Code: AP10241
  • Availability: In Stock

Related Products

Art Photonics, FlexiSpec® Standard ATR-Fiber Probes with 6.3 mm OD Shaft

Art Photonics, FlexiSpec® Standard ATR-Fiber Probes with 6.3 mm OD Shaft

FlexiSpec® product line is the latest generation of Attenuated Total Reflection. Near & Mid IR-f..

Art Photonics, FlexiSpec® Standard ATR-Fiber Probes with 6.3 mm OD Shaft (PEEK Material)

Art Photonics, FlexiSpec® Standard ATR-Fiber Probes with 6.3 mm OD Shaft (PEEK Material)

FlexiSpec® product line from art photonics is the latest generation of Attenuated Total Reflection N..

$4,631.00

Art Photonics, FlexiSpec® Sterilizable ART Probes,  Shaft-in-Shaft Design(12.0 mm OD)

Art Photonics, FlexiSpec® Sterilizable ART Probes, Shaft-in-Shaft Design(12.0 mm OD)

Sterilizable ATR Fiber Probe is a new product of FlexiSpec® product line. These ATR Probes are produ..

Tags: Spectrometer, Microscopy, FTIR, Raman, Sample Preparation, Photonics, Fiber Probe