The CD1 Multi-Diaphragm Metering Pump delivers smooth, continuous chemical feed even when injecting chemicals that off-gas like Peracetic Acid and Sodium Hypochlorite. The cutting-edge Hyperdrive Technology allows for alternating pumping action between two diaphragms: when one diaphragm is in the suction phase, the other is in the discharge, resulting in a smooth chemical feed profile and eliminating the chance of vapor lock.

Key Features

Exclusive Hyperlink Drive technology allows for smooth chemical feed
Dual Diaphragm with full stroke technology will not lose prime, ideal for pumping chemicals that off-gas (Peracetic Acid, Sodium Hypochlorite)
Can pump chemicals continuously, like a peristaltic pump, without the need for tube assemblies
Communication & Interface:

Input: Remote Start/Stop: Non-powered dry contact closure for remote start/stop
Input: Compatible with Flow Verification Sensors S6A and Micro-Flo
Output: Alarm relay 250V / 3A
Output: Motor On / Off single solid-state
SCADA Inputs include: 4-20mA. (Included with CD1V only)

Superior Design:

2 Year Warranty
Energy-efficient brushless DC motor will not overheat
Snap-in-place wall and floor mounting bracket – Patent pending
Manifold design allows for multiple configuration possibilities – suction and discharge ports can be positioned on the left and right side of the pump

Safety Features:

Diaphragm Failure Detection (DFD) Senses diaphragm rupture by detecting chemical in the pump head. No false triggering – Patented
Lockout feature prevents any unwanted tampering – Patent pending
Display shield to protect controls from harsh environments

Power Cord Options

115VAC, 50/60Hz (0.6A Max.) = NEMA 1/15 (USA)
230VAC, 50/60Hz (0.6A Max.) = NEMA 6/15 (USA)
220V50/60Hz (0.3A max.) = CEE 7/VII (EU)
240V50/60Hz (0.3A max.) = AS 3112 (Australia/New Zealand)
230V50/60Hz (0.3A max.) = BS 1363/A (UK)

Typical Applications

Water treatment and conditioning
Soap, wax and detergent injection
Wastewater treatment
Biocide feed
Rural water systems
Cooling tower & boiler treatment
Fertilizer and nutrient injection
Pool chlorination & PH control

CD1 Multi-Diaphragm Metering Pump
Discharge injection fitting with check valve
Suction tube – clear PVC – 5′ length (3/8″ OD, 1/4″ ID)
Suction foot valve / strainer
Suction ceramic weight
Discharge tube – opaque polyethylene – 5′ length (3/8″ OD, 1/4″ ID)
Mounting hardware kit
Display shield

Thumb	File information
	80000-610-CD1-Instruction-Manual.pdf File Size 11.05MB
	85000-154-CD1-Technical-Data-Sheet.pdf File Size 931.04KB

Diaphragm Metering Pump
Max. Working Pressure	150 PSIG(10.3 bar)
Max. Fluid Temperature	185 °F (85 °C)
Ambient Temp Range	14 °F to 115 °F ( -10 °C to 46 °C)
Max. Viscosity	1000 Centipoise
Max. Suction Lift	20 Ft. Water
Turndown Ratio	2,000:1, (0.05% – 100%) Max rpm = 100
Pump Dimensions	7-1/4” W x 9” H x 10” D (18.5 W x 22.9 H x 25.2 D cm)
Shipping Weight (KG)	3.8Kg