• Advantec Disposable Capsule Filters, Polypropylene (PP) Housing
    Advantec Disposable Capsule Filters, Polypropylene (PP) Housing Advantec Disposable Capsule Filters, Polypropylene (PP) Housing Advantec Disposable Capsule Filters, Polypropylene (PP) Housing

This product is made of all-polypropylene housing which is sturdy and chemically compatible. It has a standard size of 78 mm in diameter and wide range of retentive pore size.  All types of filters available in three different lengths.  Capsules are vented at both ends for bleeding trapped air and for draining. 


Key Features

  • All-polypropylene housing is thermally fused and offers broad chemical compatibility;
  • Diameter is a standard 78 mm;
  • Selected media available pre-sterilized by ethylene oxide (EtO);
  • Max operating pressure is 57 psi (3.9 bar);
  • Max operating temperature is 140°F (60°C)
  • Fluidics connectors available: 1/4'' NPT male, 1/2'' NPT Male; 3/8'' barb, 1.5'' sanitary fitting
  • Media: PES (hydrophilic), PTFE (Hydrophobic or Hydrophilic), PP (hydrophobic) 
  • Pore size or nominal rating: 0.2-0.45 um, 0.05-1.0 um, 0.20 um, 0.8-30 um, 0.45-1.0 um;  
  • Cannot be used for air filtration 


Typical Applications

  • Filter tissue culture media, fermentation broth, and ground water
  • Can be set in serial mode to maximize throughput volumes
  • Point-of-use sterile filtration
  • Use capsules for pilot/prototype studies, scale up to the same media in the cartridge format


Thumb File information
Capsure Filter Datasheet.pdf 2.21MB
Advantec
Connections 1/4'' NPT male, 1/2'' NPT Male; 3/8'' barb, 1.5'' sanitary fitting
Filter Size Diameter of 78 mm
Housing Material PP
Max Pressure 0.39 MPa (57 PSI)
Membrane Material Polypropylene, PES, PTFE
Particle Retention 99.9%
Effective Filtration Area(cm^2) Up to 3600
Max Operating Temperature 60 °C (140 °F)
Dimension 78mm diameter x 102/129/201mm Height
Weight 220g

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Advantec Disposable Capsule Filters, Polypropylene (PP) Housing

  • Brand: Advantec
  • Product Code: ASP-PP800100
  • Availability: In Stock

Available Options


Related Products

Polypropylene Syringe Filters, Pore 0.22-10 µm, D25 mm, Double Luer Lock, Nonsterile

Polypropylene Syringe Filters, Pore 0.22-10 µm, D25 mm, Double Luer Lock, Nonsterile

These syringe filters are particularly designed for laboratory single-use, and they are superior in ..

$98.99

PTFE Syringe Filters, Pore 0.22-10 µm, D25 mm, Double Luer Lock, Nonsterile

PTFE Syringe Filters, Pore 0.22-10 µm, D25 mm, Double Luer Lock, Nonsterile

These syringe filters are particularly designed for laboratory single-use, and they are superior in ..

$142.99

In-line Filter holder, PP Material, for Ø25mm Filters, Silicone O-ring, Inlet and Outlet: Female/Male Luer Lock

In-line Filter holder, PP Material, for Ø25mm Filters, Silicone O-ring, Inlet and Outlet: Female/Male Luer Lock

Thermoplastic polymer Polypropylene (PP)  provides this units durability and compatibility wi..

$61.47

Syringe Filters with Polypropylene (PP), 1 μ m Pore size, 25mm, Luer-Lok/Luer Slip, Nonsterile, 100 units per pack

Syringe Filters with Polypropylene (PP), 1 μ m Pore size, 25mm, Luer-Lok/Luer Slip, Nonsterile, 100 units per pack

These syringe filters are particularly designed for laboratory single-use, and they are superior in ..

$92.68

Tags: Inline filter