The A-100N Polymer pump is equipped with an enhanced tube failure detection  (TFD) system which is designed to stop the pump and provide a contact closure output in the event the pump tube should rapture and fluid enters the pump head. This system is capable of detecting the presence of a large number of chemicals including oil and water based polymers and others.   There are four pump tube material options: Norprene®, Norprene® Chemical, Tygothane®, and FKM. It is self-priming against maximum line pressure and cannot vapor lock or lose prime.  New and Improved Pump Head provides increased performance and strength.

Key Features

• Peristaltic pump design does not have valves that can clog requiring maintenance.
• Self priming – even against maximum line pressure. By-pass valves are not required. Cannot vapor lock or lose prime.
• Outputs to 5.17 GPH (19.56 LPH).
• Output pressures to 65 PSI (4.5 bar).
• Output volume is not effected by changes in back pressure.
• Patented pump tube design installs easily and stays centered on the rollers without manual adjustment.
• Two pump tubes supplied with each pump. No extra tubing required.
• Easy to use dial knob speed adjustment.
• Built-in Tube Failure Detection Plus system (TFD+). Senses chemical in the pump head, shuts off the pump and activates an NPN open collector output.
• Compatible with Blue-White’s output flow verification sensor system.
• Durable housing of chemical resistant Valox (PBT)thermoplastic.

Typical Applications

• Water treatment and conditioning
• Proportional chemical injection
• Wastewater treatment
• Biocide feed
• Rural water systems
• Cooling tower and boiler treatment
• Fertilizer and nutrient injection
• Pool chlorination and PH control