• Fluorosurfactant Dissolved in Fluorinated Oils for Droplet Microfluidics Test Kit 1 for Begineers
    Fluorosurfactant Dissolved in Fluorinated Oils for Droplet Microfluidics Test Kit 1 for Begineers Fluorosurfactant Dissolved in Fluorinated Oils for Droplet Microfluidics Test Kit 1 for Begineers

Fluorosurfactants have been widely used to stablize emulsion, i.e. the dispersed droplets. The mechanism of droplet stabilization is based on the surface tension reduction on the water droplets by the fluorosurfactants. This test kit is designed for beginners and contains:

  • 10g of 5% (weight) 008 FluoroSurfactant in HFE7500
  • 10g of 5% (weight) 008-FluoroSurfactant in FC40
  • 50g of neat HFE7500
  • 50g of neat FC40

Key Features 

  • Chemically compatible with aqueous matrices and analytes including proteins, DNA, and other common chemical species
  • Biologically compatible with biological cells, animals, and bacterials
  • Highly purified using high-tech procedures
  • Reproducibility
  • Chemical structure modifications


Typical Applications

  • Encapsulating cells, proteins, DNAs, and RNAs
  • High-throughput screening of conditions for protein crystallization
  • Single-cell high-throughput genome sequencing
  • Single-cell high-throughput screening
  • Single cell analysis of protein
  • Quantitative detection of single-cell protein expression
  • Barcoding for single-cell transcriptomics in microdroplets
  • Single cell enzymatic kinetics
  • Droplet PCR

 




Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Fluorosurfactant Dissolved in Fluorinated Oils for Droplet Microfluidics Test Kit 1 for Begineers

  • $700.00


Related Products

Fluorosurfactant Dissolved in Fluorinated Oils (HFE7500 or FC40) 2% Weight 500g for Droplet Microfluidics

Fluorosurfactant Dissolved in Fluorinated Oils (HFE7500 or FC40) 2% Weight 500g for Droplet Microfluidics

Pure Fluorosurfactants can be mixed  with fluorinated oil to stabilize water-in-oil microdrople..

$5,200.00

FluoroSurfactant (un-dissolved or neat) for Droplet Microfluidics

FluoroSurfactant (un-dissolved or neat) for Droplet Microfluidics

Pure Fluorosurfactants can be mixed  with fluorinated oil to stabilize water-in-oil microdrople..

$605.00

Emulseo FLUOSURF TM  Neat Fluorinated Surfactant for Droplet Generation

Emulseo FLUOSURF TM Neat Fluorinated Surfactant for Droplet Generation

FluoSurf™ is a biocompatible fluorinated surfactant specifically designed and optimized for producti..

Emulseo FLUOSURF TM Fluorinated Surfactant Diluted in HFE7500 for Droplet Generation

Emulseo FLUOSURF TM Fluorinated Surfactant Diluted in HFE7500 for Droplet Generation

FluoSurf™ is a biocompatible fluorinated surfactant specifically designed and optimized for producti..

Emulseo FLUOSURF TM Fluorinated Surfactant in FC40 for Droplet Generation

Emulseo FLUOSURF TM Fluorinated Surfactant in FC40 for Droplet Generation

FluoSurf™ is a biocompatible fluorinated surfactant specifically designed and optimized for producti..

Emulseo FLUO-OIL 40 for Droplet Generation

Emulseo FLUO-OIL 40 for Droplet Generation

Fluo-Oil 40 is a fluorinated oil proposed by Emulseo as an alternative to Fluorinert™ FC-40 for micr..

Emulseo FLUO-OIL 7500 for Droplet Generation

Emulseo FLUO-OIL 7500 for Droplet Generation

The fluorinated oil comprises a polyfluorinated surfactant (<0.1%) solubilized in Novec™ 7500 oil..

Emulseo FLUO-OIL 135 for Droplet Generation

Emulseo FLUO-OIL 135 for Droplet Generation

Fluo-Oil 135 is a fluorinated oil proposed by Emulseo as an alternative to Novec™ 7500 (similar chem..

Emulseo FLUO-ST1, SURFACE TREATMENTS For adequate wetting

Emulseo FLUO-ST1, SURFACE TREATMENTS For adequate wetting

The surface treatment Fluo-ST1 (7mL) is composed of fluoroalkylsilanes that are chemically reactive ..

$162.60

Emulseo FLUO-ST2, SURFACE TREATMENTS For adequate wetting

Emulseo FLUO-ST2, SURFACE TREATMENTS For adequate wetting

The surface treatment Fluo-ST2 is a clear, low viscosity, low surface tension solution of a fluorosi..

$107.40

Emulseo FLUO-OIL 200 for Droplet Generation

Emulseo FLUO-OIL 200 for Droplet Generation

Fluo-Oil 200 is a fluorinated oil proposed by Emulseo as an alternative to Fluorinert™ FC-40 oil for..

$121.80

Emulseo FLUO Break Specialty Chemicals For Successful Microfluidic Experiments

Emulseo FLUO Break Specialty Chemicals For Successful Microfluidic Experiments

This emulsion breaker is a clear fluorinated chemical solution that has been formulated to efficient..

$222.60

Emulseo FLUOSURF-C TM Fluorinated Surfactant (Neat) for Droplet Generation

Emulseo FLUOSURF-C TM Fluorinated Surfactant (Neat) for Droplet Generation

FluoSurf-C™ is a high-performance fluorinated surfactant designed and optimized to stabilize aqueous..

$598.20

Emulseo FLUOSURF-O TM Fluorinated Surfactant (Neat) for Droplet Generation

Emulseo FLUOSURF-O TM Fluorinated Surfactant (Neat) for Droplet Generation

FluoSurf-O™ is a high-performance fluorinated surfactant designed and optimized to stabilize aqueous..

$598.20

Emulseo FLUOSURF-S TM Fluorinated Surfactant (Neat) for Droplet Generation

Emulseo FLUOSURF-S TM Fluorinated Surfactant (Neat) for Droplet Generation

FluoSurf-S™ is a high-performance fluorinated surfactant designed and optimized to stabilize aqueous..

$598.20

Emulseo FLUO-ST3, SURFACE HYDROPHOBIC TREATMENTS

Emulseo FLUO-ST3, SURFACE HYDROPHOBIC TREATMENTS

Fluo-ST3 is a fluorophilic/hydrophobic surface treatment composed of a fluoroalkylsilane dissolved i..

$127.40

Tags: Chemical, Microfluidics, Surface Modification, Droplet, Surfactant